User stamp – Lanier 1027 User Manual
Page 141
Stamp
129
2
FFFF
Change the stamp position, size
or density.
If you do not wish to make a
change, go to step
G
.
To change the stamp position,
size or density
A
A
A
A
Press the [Change] key.
B
B
B
B
Select the desired position,
size and density.
C
C
C
C
Press the [OK] key.
Note
❒ To cancel the settings, press
the [Cancel] key.
GGGG
After you specify all the desired
settings, press the [OK] key.
HHHH
Press the [OK] key.
Note
❒ To cancel the settings, press the
[Cancel]
key.
IIII
Place your originals, and then
press the
{
{
{
{
Start
}
}
}
}
key.
User Stamp
The optional HDD and 32 MB of
memory are required to use this func-
tion (if the machine is equipped with
the Printer unit, 32 MB of memory is
not required).
Up to four messages which you use
frequently can be stored in the ma-
chine's memory and stamped on cop-
ies.
Preparation
Before using this function, you
have to store your messages with
the User Tools.
⇒ p.131 “Pro-
gram/Delete User Stamp”
Limitation
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
Note
❒ You can change the print page
with the User Tools.