Lanier 1027 - Manual (Page 17)

5
Guide To Components
1. Exposure glass cover (option) or
Document feeder (ADF) (option)
Lower the exposure glass cover over
originals placed on the exposure glass for
copying. If you have the document feed-
er, load a stack of originals here. They
will be fed automatically one by one.
(The illustration shows the document
feeder.)
2. Exposure glass
Place originals face down here for copy-
ing.
⇒ p.18 “Originals”
3. Internal tray
Copied paper is delivered here face
down.
4. Ventilation holes
Prevents overheating. Do not obstruct
the ventilation holes by placing an object
near it or leaning an object against it. If
the machine overheats, a fault might oc-
cur.
5. Main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on. If it
is off, turn it on.
6. Main power indicator
This indicator lights up when the main
power switch is turned on and goes off
when the switch is turned off.
7. On indicator
This indicator lights up when the opera-
tion switch is turned on and goes off
when the switch is turned off.
8. Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
9. Control panel
⇒ p.8 “Control Panel”