Lanier 1027 - Manual (Page 170)

Troubleshooting
158
3
Stamp
Combine
In Image Repeat mode, the
original image is not copied
repeatedly. You selected copy paper the
same size as the originals, or
you did not select the proper
reproduction ratio. Select copy paper larger than
the originals.
Select the proper reproduc-
tion ratio.
Problem Cause Action
The stamp position is wrong. The paper orientation is
wrong. Check the paper orientation
and stamp position.
Problem Cause Action
You cannot make a book from
a booklet or magazine by fold-
ing copies. Combine Original Booklet
Format or Combine Original
Magazine Format is not cor-
rect. Change the setting. ⇒ p.91
“Combine”
Parts of the image are not cop-
ied. You specified a reproduction
ratio that does not match the
sizes of your originals and
copy paper. When you specify a reproduc-
tion ratio using Manual Paper
Select mode, make sure that
the ratio matches your origi-
nals and the copy paper.
Note
❒ Select the correct repro-
duction ratio before using
Combine mode.
Order of copies is not correct. You placed the originals in the
incorrect order. When placing a stack of origi-
nals in the document feeder,
the last page should be on the
bottom.
If you place an original on the
exposure glass, start with the
first page to be copied.
Problem Cause Action