Lanier 1027 - Manual (Page 187)

e Removing Jammed Staples
175
3
e e e e Removing Jammed Staples
Note
❒ Staples might jam because of curled copy paper. In this case, try turning the
copy paper over in the tray. If there is no improvement, change to copy pa-
pers with less curl.
❒ When 500-Sheet Finisher is installed, after removing jammed staples, staples
might not be ejected the first few times you try to use the stapler.
Reference
For the type of finisher, refer to “Options”
⇒ p.7
500-Sheet Finisher
• 1: Open the side cover.
• 2: Remove the cartridge.
• 3: Open the face plate.
• 4: Remove the jammed staples.