Lanier 1027 - Manual (Page 19)

7
Options
1. 500-Sheet Finisher
Sorts, stacks and staples the copies.
2. Bridge unit
Relays copies to the finisher.
3. Exposure glass cover
Lower this cover over originals for copy-
ing.
4. Document feeder (ADF)
Load a stack of originals here. They will
be fed automatically.
5. Internal tray 2 (1 bin tray)
If you select this as the output tray, cop-
ied paper will be delivered here face
down.
6. 1000-Sheet Finisher
Sorts, stacks and staples the copies.
*1 : Finisher proof tray
*2 : Finisher shift tray
7. Shift sort tray
Sorts and stacks the copies.
8. Paper tray unit
Consists of two paper trays.
9. Large Capacity Tray (LCT)
Holds 2000 sheets of paper.
10. Bypass tray
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
lucent paper, postcards, envelopes and
non-standard size paper.
⇒ p.61 “Copy-
ing from the Bypass Tray”
11. Duplex unit
Use to make two-sided copies.
12. Inter change unit
Required when installing the internal
tray 2 (1 bin tray) and duplex unit.