Lanier 1027 - Manual (Page 219)

207
5. REMARKS
Do's And Don'ts
R CAUTION:
Important
❒ If you want to unplug the power
cord or turn off the main power
switch, make sure that the remain-
ing memory space indicates 100%
on the display for facsimile mode.
❒ While the machine is unplugged,
you can neither send nor receive a
fax.
Reference
For details, see the Facsimile Refer-
ence.
• When you use this machine for a
long time in a confined space with-
out good ventilation, you may no-
tice an odd smell. To keep the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.
• Do not touch areas on or around
the fusing unit. These areas get hot.
• After making copies continuously,
t h e e x p o s u r e g l a s s m a y f e e l
warm—this is not a malfunction.
• The area around the ventilation
hole might feel warm. This is
caused by exhaust air and is not a
malfunction.
• Do not turn off the operation
switch while copying or printing.
Make sure that all copying or
printing has finished.
• The machine might fail to produce
good copy images if condensation
forms inside the machine due to
rapid temperature change.
• Do not open the covers of the ma-
chine while copying or printing. If
you do, misfeeds might occur.
• Do not move the machine while
copying or printing.
• If you operate the machine im-
properly or a failure occurs with
the machine, your machine set-
tings might be lost. Be sure to make
a note of your machine settings.
• The supplier shall not be liable for
any loss or damage resulting from
a failure with the machine, loss of
machine settings, or use of the ma-
chine.
• Unplug the power cord from the
wall outlet before you move the
equipment. While moving the
equipment, you should take care
that the power cord will not be
damaged under the equipment.