Lanier 1027 - Manual (Page 22)

10
Display Panel
The display panel shows the status of the machine, error messages and function
menus.
Important
❒ Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to
the display panel. If you do, the display might be damaged.
Note
❒ The function items displayed serve as selector keys. You can select or specify
an item by lightly pressing it.
❒ When you select or specify an item on the display panel, it is highlighted like
.
❒ Keys appearing as cannot be used.
Displays and Key Operations
Note
❒ The following illustrations are examples for a machine with the optional
1000-sheet finisher installed.
❖ ❖ ❖ ❖ Initial copy display
1. Original mode, Image Density
and Special Original mode
2. Operational status or messages
3. You can register up to three fre-
quently used reduce/enlarge ratios
other than the fixed reduce/enlarge
ratios.
⇒ ⇒ ⇒ ⇒ "Shortcut R/E" on p.191
“Reproduction Ratio 1 /
2
”
4. The number of originals scanned
into memory, number of copies set,
and number of copies made
5. Sort, Stack or Staple mode
6. Displays the contents of the
Shortcut keys. You can register fre-
quently used functions in these
keys.
⇒ ⇒ ⇒ ⇒ "Copy Function Key F1-F5"
on p.189 “General Features 3 /
4
”
OK