Lanier 1027 - Manual (Page 27)

15
1. Basics
Turning On the Power
To turn the machine on, press the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See p.30 “Auto Off”
and "Timer Setting" in the System
Settings manual.
- - - -Power switches
This machine has two power switch-
es.
⇒ p.10 “Display Panel”
❖ ❖ ❖ ❖ Operation switch (right side of the
control panel)
Press this switch to activate the
machine. When the machine has
warmed up, you can make copies.
❖ ❖ ❖ ❖ Main power switch (front of the ma-
chine)
When the machine is not to be used
for an extended period of time,
turn off the main power switch.
Turning On the Main Power
AAAA
Make sure that the power cord is
firmly plugged into the wall out-
let.
BBBB
Open the switch cover and turn
on the main power switch. The
Main Power indicator goes on.
Important
❒ Do not switch off the main pow-
er immediately after it has been
switched on. Failure to observe
this may result in damage to the
hard disk or memory, leading to
malfunctions.
❒ You can use the machine within
15 seconds after the main power
switch has been turned on.