Lanier 1027 - Manual (Page 43)

Placing Originals
31
2
Placing Originals
Limitation
❒ Place originals after correction flu-
id and ink have completely dried.
Not taking this precaution could
dirty the exposure glass with
marks that will be copied.
Note
❒ Some copy functions may produce
different results depending on the
direction of the originals. For de-
tails, see the explanation for each
function.
Reference
⇒ p.18 “Originals”
Placing Originals on the
Exposure Glass
AAAA
Lift the exposure glass cover or
the document feeder.
Important
❒ Do not open the exposure glass
cover or the document feeder
forcefully. Otherwise, the cover
of the document feeder might
open or be damaged.
Note
❒ Be sure to open the exposure
glass cover or the document
feeder by more than 30
°. Other-
wise, the size of the original
might not be detected correctly.
BBBB
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
1: Reference mark
2: Scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
document feeder.