Lanier 1027 - Manual (Page 44)

Copying
32
2
Placing Originals in the
Document Feeder
Note
❒ The last page should be on the bot-
tom.
❒ Do not stack originals beyond the
limit mark on the side fence of the
document feeder.
❒ The original might become dirty if
it is written with a pencil or a sim-
ilar tool.
❒ You cannot place a multi-page
original with pages of different siz-
es in the document feeder. If the
originals contains pages of differ-
ent width, use the SADF function
and place each page one at a time.
Alternatively, place pages one at a
time on the exposure glass.
❒ A multi-page original with the
same width can be placed in the
document feeder using Mixed Size
mode function.
❒ Do not place any foreign objects on
the sensors or cover them with
your hands. This could cause the
size not to be detected properly.
1: Sensor
Reference
Regarding originals that the docu-
ment feeder can handle.
⇒ p.18
“Originals”
Placing a Stack of Originals in
the Document Feeder
AAAA
Place the aligned originals face
up into the document feeder.
1: Limit mark
2: Document guide
Note
❒ Straighten curls in the originals
before placing them in the doc-
ument feeder.
❒ To avoid a multi-sheet feed, shuf-
fle the originals before placing
them in the document feeder.