Lanier 1027 - Manual (Page 53)

Basic Functions
41
2
Selecting Copy Paper
There are two ways to select copy paper:
❖ ❖ ❖ ❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio.
⇒ p.43 “Rotated copy”
❖ ❖ ❖ ❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: a paper tray, by-
pass tray or large capacity tray (LCT).
Reference
⇒ p.61 “Copying from the Bypass Tray”
Limitation
❒ Only the paper trays set to "No Display" or "Recycled Paper" in "Paper Type",
and also set to "Yes" in "Apply Auto Paper Select", can be selected in Auto Pa-
per Select mode.
⇒ "Paper Size Setting" in the System Settings manual
❒ If you set all the paper trays other than "No Display" or "Recycled Paper", you
cannot use Auto Paper Select.
Note
❒ See the following table for copy paper sizes and directions that can be used
with Auto Paper Select (when copying at a ratio of 100%).
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version
❒ For some originals, the original size might not be detected correctly. ⇒ p.20
“Sizes difficult to detect”
❒ When you load special paper, such as recycled paper, in a paper tray, you can
have the paper type shown on the display.
⇒ "Special Paper Indication" in the
System Settings manual
Where Original Is Placed Paper Size and Direction
Exposure glass A3 L , B4 L , A4 KL , B5 KL , A5 L , 8 1 /
2
" ×
14" L , 8 1 /
2
" × 13" L
Document feeder A3 L , B4 L , A4 KL , B5 KL , A5 KL , 8 1 /
2
"
× 13" L
Where Original Is Placed Paper Size and Direction
Exposure glass 11"
× 17" L , 8 1 /
2
"
× 14" L , 8 1 /
2
"
× 11" KL ,
10"
× 14" L , 8"
× 10" L
Document feeder 11" × 17" L , 8 1 /
2
" × 14" L , 8 1 /
2
" × 11" KL ,
10" × 14" L , 5 1 /
2
" × 8 1 /
2
" L