Lanier 1027 - Manual (Page 79)

Programs
67
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
❖ ❖ ❖ ❖ Storing Your Settings
You can store the settings you fre-
quently use.
❖ ❖ ❖ ❖ Deleting A Program
You can delete a stored program.
❖ ❖ ❖ ❖ Recalling A Program
You can recall a stored program.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned on.
⇒
“Change Initial Mode” on p.187
“General Features
2 /
4
”
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of the same
size, the paper tray prioritized
with the User Tools (System Set-
tings) will be selected first. Refer to
the System Settings manual.
❒ Programs are not cleared by turn-
ing the power off or by pressing
the
{ { { {
Clear Modes
} } } } key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
Storing a Program
AAAA
Edit the copy settings so that all
functions you want to store in this
program are selected.
BBBB
Press the
{ { { {
Program
} } } }
key.
CCCC
Press the [Register] key.
DDDD
Press the program number you
want to store.
Note
❒ Program numbers with m al-
ready have settings in them.
Reference
⇒ p.68 “Changing a stored pro-
gram”