Other functions, Energy saver mode, Interrupt copy – Lanier 1027 User Manual
Page 83: 2other functions
Other Functions
71
2
Other Functions
Energy Saver Mode
If you do not operate the machine for
a certain period after copying or
when you press the
{
{
{
{
Energy Saver
}
}
}
}
key, the display disappears and the
machine enters Energy Saver mode.
When you press the
{
{
{
{
Energy Saver
}
}
}
}
key again, the machine returns to the
ready condition. In Energy Saver
mode, the machine uses less electrici-
ty.
Note
❒ If you press the
{
{
{
{
Energy Saver
}
}
}
}
key
during an operation, the current
settings will be cleared.
❒ It takes about 3 seconds to return
to the ready condition from Energy
Saver mode.
Reference
⇒"Low Power Timer" in the Sys-
tem Settings manual
Interrupt Copy
Use this function if you wish to inter-
rupt a long copy job to make urgently
needed copies.
Limitation
❒ You cannot use the Interrupt Copy
function when scanning fax origi-
nals.
Note
❒ The procedure for making inter-
rupt copies depends on which
kind of operation the machine is
currently carrying out.
To interrupt an original being fed by the
document feeder
AAAA
Press the
{
{
{
{
Interrupt
}
}
}
}
key.
The Interrupt indicator goes on
and scanning stops.
BBBB
Remove the originals that were
being copied and place the origi-
nals you wish to copy.
CCCC
Press the
{
{
{
{
Start
}
}
}
}
key.
The machine starts making your
copies.
DDDD
When your copy job is finished,
remove your originals and copies.
EEEE
Press the
{
{
{
{
Interrupt
}
}
}
}
key again.
The Interrupt indicator goes off.
FFFF
When the display prompts you,
replace the originals that were be-
ing copied before.