Original beeper, Sample copy – Lanier 1027 User Manual
Page 84
Copying
72
2
GGGG
Press the
{
{
{
{
Start
}
}
}
}
key.
Note
❒ The previous copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
To interrupt copying after all originals
have been fed by the document feeder
AAAA
Press the
{
{
{
{
Interrupt
}
}
}
}
key.
The Interrupt indicator goes on.
Note
❒ Copying will not stop yet.
BBBB
Place your original.
CCCC
Press the
{
{
{
{
Start
}
}
}
}
key.
The machine stops the original job
and starts copying your original.
DDDD
When copying is complete, re-
move your originals and copies.
EEEE
Press the
{
{
{
{
Interrupt
}
}
}
}
key again.
The Interrupt indicator goes off.
The previous copy job settings will
be restored and the machine will
continue copying from where it
left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒ To cancel this function, ⇒ "Tone:
Original remains" on p.187 “Gen-
eral Features
2
/
4
”.
Sample Copy
Use this function to check a copy set
before making a long copy run.
Limitation
❒ This function can be used only
when the Sort function has been
turned on.
AAAA
Select Sort and any other func-
tions, and then enter the number
of copy sets to be made.
BBBB
Place the originals.
CCCC
Press the
{
{
{
{
Sample Copy
}
}
}
}
key.
One copy set is delivered as a sam-
ple.
DDDD
After checking the results, press
the [Print] key if the sample is ac-
ceptable.
The number of copies made is the
number you specified minus one
for the proof copy.
Note
❒ If you press the [Suspend] key
after checking the results, re-
turn to step
A
to adjust the copy
settings as necessary. You can
change the settings for Staple,
Duplex, C opy Orientation ,
Stamp, Margin Adjust, and
Cover/Slip Sheet. However, de-
pending on the combination of
functions, you may not be able
to change some settings.
❒ You cannot use the Sample
Copy function after changing
the settings.