Lennox Hearth H6977 - Manual (Page 4)

4 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 11
Step 20. Bundle the new cables and the A/V cables together and wrap
with masking tape, or rout them through the flexible conduit if provided.
See Figures 11 and 12.
Step 21. Tack the wire harness into the side frame and replace the wire
harness shield, if provided (
see Figure 13 ).
Figure 12
Figure 13
New Cables Routed
Figure 10
Push The Remote Receiver Into The Rectangular Slot
Bundle New Cables And A/V Cables Together With Tape
Tack Wire Harness Behind Side Frame