Lennox Hearth H6977 - Manual (Page 6)

6 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 17
Strap The DVD Player
Figure 16
Attach A/V Cables And IR Transmitter Unit
DVD INSTALLATION INSTRUCTIONS
Refer to the DVD Replacement Kit Installation Instructions manual (No.
750,250M) for additional aid on the following steps:
Step 1. Before installing the DVD player, connect the new DVD player
to an electrical outlet and insert the DVD disc into the drawer.
Step 2. Disconnect the DVD player and bring it into the fireplace cavity.
Step 3. Proceed to connect the A/V cables as labeled. Connect the
power cord.
Step 4. Place a piece of Velcro on the DVD player eye and attach the IR
transmitter unit to it (
see Figure 16 ).
Step 5. With the controls facing to the right hand side, tilt the DVD player
sideways under the front frame, to insert it into position.
Step 6. Using the new remote control, test the fireplace for proper
operation.
Step 7. Strap the DVD player ( see Figure 17 ).
Step 8. Re-assemble the fireplace parts in reverse order.