LSI 8751D - Manual (Page 17)

LSI8751D PCI to SCSI Host Adapter 2-1
Chapter 2
Installing the LSI8751D
This chapter provides instructions on how to install the LSI8751D and
includes these topics:
•
Section 2.1, “Quick Installation Procedure,” page 2-1
•
Section 2.2, “Detailed Installation Procedure,” page 2-2
•
Section 2.3, “Completing the Installation,” page 2-21
2.1 Quick Installation Procedure
This section provides quick setup instructions for the experienced
computer user with prior host adapter installation and SCSI bus setup
experience. If you prefer more detailed guidance for installing the
LSI8751D, please follow the instructions in
Section 2.2, “Detailed
Installation Procedure.”
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before handling this host adapter board, then
remove the cabinet cover on your computer to access the PCI
slots.
Note: The use of a static ground strap is recommended.
Step 2. Remove the LSI8751D from the packing and check that it is not
damaged.
Step 3. Turn off and unplug your system.
Step 4. Open your PC cabinet.
Step 5. Locate the slots for installing a PCI plug-in board.
Step 6. Insert the LSI8751D board into the selected PCI slot.