Liebert Distribution Monitoring LDM - Manual (Page 22)

Operation
18
5.3 Downloading the Software
The Liebert LDM has three software tools for monitoring, configuration and firmware updates:
• Monitoring - see 5.4 - Using the Monitor Tool
• Configuration - see 5.5 - Using the Configuration Tool
• Firmware updates - see 5.6 - Upgrading the Firmware
These programs may be downloaded at no charge or license fee at Liebert’s Web site at:
http://www.liebert.com/product_pages/ProductDocumentation.aspx?id=72
5.4 Using the Monitor Tool
The Monitor tool supports service terminal connections through the LDM Setup port. The tool dis-
plays the following information:
• Main input voltage and currents
• Total power
• Individual branch circuit breaker currents
• Event log
• System clock (date and time)
• Reset kWh function
A special registry key may be installed in the PC to enable the auto-zero control option and provide
access to a more in-depth event log. This diagnostic feature is reserved for use by Liebert Services and
Emerson Network Power technical personnel.
5.4.1 Starting the Monitor Tool
• If needed, download the latest version of the software (see 5.3 - Downloading the Software).
• Run the executable file Monitor-xx.exe (where xx is the latest version) to start the Monitor tool.
• In the Connect window, select the appropriate COM port, shown below left. The dialog box lists
available ports only. If a port is in use, it does not appear in the list.
• Click Connect.
• The Monitoring main window, below right, opens after communication is established.
NOTE
The software may be updated and changed without any notification. Check the Web site
regularly to ensure the software is up-to-date.
Connect
COM port