Specifications final installation - method b – Linear M3300CD User Manual

Page 11

Advertising
background image

11

CD Player

Signal/Noise Ratio ............................... > 60 dB

Frequency Response ............... 20 Hz – 20 kHz

Channel Separation .............................. > 62 dB
FM Tuner

Tuner Range ........................ 87.5 – 107.9 MHz

Usable Sensitivity ................................. 5 dBuV

Stereo Separation @ 1 kHz ..................... 28 dB
AM Tuner

Tuner Range ........................... 530 – 1710 kHz

Usable Sensitivity .................................... 30qV

General

Operating Power ...... 12 VDC, Negative Ground
Maximum Power Output .............. 4 x 45 Watts
RMS Power ................................. 4 x 19 Watts
RCA Line Out ...... Low-Level Outputs - 1000MV
Output Impedance ..Compatible 4-8 Ohm Speakers
Fuses .....................................................15 amp
Dimensions ...... 178 (w) x 178 (d) x 51 (h) mm

Specifications are subject to change without notice.

Specifications

Final Installation - Method B

1

3

3

2

2

5

4

Installing the Unit

1: Screw holes on the side of the unit.
2: Screws. Use wither truss screws (5 x 8mm) or

flush surface screws (4 x 8mm), depending on

the shape of the screw holes in the bracket.

3: Vehicle’s factory mounting bracket.

4: Dashboard or console.

5: Hook (Remove this part).

Note: The mounting sleeve, outer trim ring, and

the mounting strap are not used for this method of

installation.

Advertising