Linear M3300CD - Manual (Page 3)

3
Location and Function of Controls at a Glance (continued)
6. Mode Button (MODE): Press the MODE button to change the operating mode as follows:
RADIO > CD* > USB* > SD* > AUX > RADIO.
*Available only when there is media inserted into Disc slot, SD card slot or USB slot.
7. Track Up Button (
��
l ) : Adjusts the radio frequency, changes tracks and sets the clock.
8. SD Card Slot: Insert a SD card with the notch in the card facing up, “SD” will appear in the display.
9. USB Input: Plug in your USB device, “USB” will appear in the display.
10. Track Down Button ( l
��
) : Adjusts the radio frequency, changes tracks and sets the clock.
11. Radio Band Button (BAND): Selects the desired radio band in the following order: F1, F2, F3, A1 and A2.
12. Multi-Function Button (6, +10):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to skip up 10 tracks.
13. Multi-Function Button (5, -10):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to skip down 10 tracks.
14. Multi-Function Button (4, RDM):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to randomly play tracks.
15. Multi-Function Button (3, INT):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to activate the intro function which will play the beginning of every track for
10 seconds.
16. Multi-Function Button (2, RPT):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to repeat the current track. Press again to cancel the repeat function.
17. Multi-Function Button (1,
�
ll):
Radio: Recalls a memorized radio station, and programs a radio station into memory.
CD, SD or USB: Press to pause the current track. Press again to resume play.
18. AS/PS Button: Automatic radio station memory storing and preset radio station scanning.
19. 3.5mm Auxiliary Audio Input Jack: Plug in a device with a 3.5mm audio input plug.
20. Display Button: Press the DIS button to toggle through the available display information. In the radio
mode, program station name (PS) is the default, if not available the frequency will be displayed.
Toggle sequence: CT(clock/time)--PTY-- PS (program service, only if there is station)-- Exit Display.