Loewe Centros 2102 HD - Manual (Page 18)

- 18
Preparation
Connect the DVD recorder to the TV set with Digital
Link Plus using a SCART connection. See “Connect-
ing to the Television“ on page 14.
Activate Digital Link on the DVD recorder as
described on page 17.
Note: If the DVD recorder has got the station from
a Loewe television via Digital Link Plus (DLP), the
“Edit programme“, “Move“ and “Delete“ func-
tions are blocked and can only be used once more
when the station is overwritten again by automatic
programming.
Transfer program list
Press .
The menu is displayed.
Select the “General“ option with  / .
Press  to call up the second level.
Select the “Auto Programming“ option with 
/ .
Press  to call up the third level. The country
option is highlighted.
Select a country with  /  and press .
The “Start DLP“ symbol is highlighted.
Germany
Start Search
Start DLP
Auto Programming
Program Edit
Clock Set
Display Mode
TV Aspect
Decoder at AV1
PBC
Factory Set
Power Save Mode
Press OK to start transferring the program list
stored in the TV to the DVD recorder.
This may take a few seconds. During the transfer
the DVD recorder display shows “DLP“.
1.
2.
3.
4.
5.
6.
7.
Note: (Centros 2172). With Digital Link Plus,
French stations are only broadcast in the correct
standard if you have previously selected “France“
as the country (see Point 6 above).
Channel Setting
You can edit a channel manually (add, delete,
rename, move etc.).
Auto Programming
Program Edit
Clock Set
TV Aspect
Display Mode
Decoder at AV1
PBC
Factory Set
Power Save Mode
Edit
Press . The menu is displayed.
Select the “General“ option with  / .
The “GENERAL“ entry is selected. Press  to call
up the second level.
Use  /  to select the “Channel Setting“
option. Then press  to move to the third level.
The “Change“ symbol is highlighted.
Press OK. The “Program List“ menu is displayed..
Move Close Select Page up/down
PR Ch. MFT Station
PR-01
C 23
C 7
C 27
C 17
C 33
C 34
C 47
C 10
0
0
0
0
0
0
0
0
ZDF
RTL
SAT1
PRO7
BBC
CNN
ABC
TV5
02
03
04
05
06
07
08
09
10
11
NICAM Decoder
01 C 12 0 ARD
OK END
Use  /  to select a PR number, and press
OK. All available options that can be used on
the highlighted program are shown in the bot-
tom left fi eld. Use
 /  to select an option,
1.
2.
3.
4.
5.
6.
and press OK to confi rm.
Program edit
Station Rename
Move
Decoder on/off
NICAM auto/off
Delete
Program edit: Search, channel entry, fi ne
tuning.
Station Rename: Change name.
Move: Move a program in the progam list.
Delete: Deleting programs from the program list
Decoder on/off: Divert program via decoder
(“on“).
NICAM auto/off: Switch off NICAM reception
(“off“)
Press or , to quit the “Program
List“ menu.
Program edit
Alongside automatic programming it is also pos-
sible to set and save programs manually.
Use  /  to select a program in the “Program
List“ menu, and press OK. The options are
displayed on the left side of the “Program List“
menu.
Use  /  to select the “Program Edit“ option
and press OK. The “Program Edit“ menu is
displayed.
PR Ch. Seek MFT
OK C 7 07 0
PAL/SECAM
SECAM
 /  (left/right): Moves the cursor to the
previous or next column.
 /  (up/down): Changes the settings of the
current cursor position.
PR: Indicates the programm number (display
only)
Seek: Automatically searches for station. Use

/  to select the “Seek“ option and then press
7.
1.
2.
3.
Initial Installation