Laser DVBT-ST35 - Manual (Page 9)

 
8. Once the Wizard is complete, the TV screen will
be shown.
Note: After a few seconds, the OSD will disappear
automatically. Touch the screen anywhere to
display the OSD again.
Step 4: Quick Channel Switch.
1. Tap the screen to bring up the OSD.
2. Tap the icon to activate the channel list.
3. Tap on the desired channel to watch and then
press the [X] to exit.
4. To adjust the volume tap the [+] or [-] button as required or tap the [ ] to mute the sound. Tap again to
restore the sound.
5. To access the DVB-T system menu tap on the [menu] button.
6. To return to the Main Menu tap on the [HOME] button.
Note: Channel listings will vary between areas. It may be necessary to rescan for new channels if you have
changed location substantially. This device may not receive all channels in all areas. If reception is poor,
please try to rescan using the external antenna.