Liebherr EWTN - Manual (Page 21)

A delight in freshness
WFI1051 / EWTN 2956 19
I
NSTALLATION
LBR036
Figure 18
bolt (2). Turn clockwise for down and counter-
clockwise for up.
Maximum adjustment: 19/64" (15 mm).
3. Figure 18: Align the appliance at the side with the
cabinet side panel and attach it with screws (1).
- Cover the screws with cover caps (2).
4. Fit the ventilation grille at the bottom [(3) if the
door is hinged on the left, (4) if it is on the right]:
Secure the ventilation grille so that it touches
the floor and then adjust it using the slots.
1 2
1
2 2
3
3
3
10 spanner
8 spanner
2
Figure 17
1. Carefully slide the appliance into the cabinet
until the ventilation grille touches the surround-
ing kitchen cabinet.
2. Align the appliance until it is parallel with the
surrounding kitchen cabinet. Use the open-
end wrench 10 mm (3) to adjust the feet at the
front. Turn clockwise for up and counterclock-
wise for down. For the rear use the adjusting
- Figure 17: Connect the appliance to the
main power supply.
- If the appliance is equipped with an
IceMaker, establish the connection for
the water supply. See “IceMaker, Water
Connection”.