Lucent Technologies MDW 9031DCP - Manual (Page 15)

MDW 9031/9031DCP Dual Zone Pocket Phone
503-801-169
Handling Calls Dual Zone Pocket Phone
1
Issue 2 April 1999 8
Administration for DEFINITY, After Release 5.0
For DEFINITY Communications Systems after Release 5.0, you must
administer 2 station ports (2 primary extension numbers)—one for each
radio module. Administer station port 1 as the primary station port with call
appearances, and then administer station port 2 as a zero call appearance
station with bridged appearances of port 1 if the Dual Zone Pocket Phone is
your only telephone. If you have a wired telephone, keep your wired
telephone as the primary station port and administer both Dual Zone ports as
zero call appearance stations with bridged call appearances of the primary
wired telephone.
Note: All bridged extension conventions apply. For example, when
configured as part of an ACD split, only the primary station port
(extension) will ring.
MDW 9031 Dual Zone
For station configuration settings, see the sample screens (Figure 2a and
Figure 2b) in Appendix A for Type 7315H.
MDW 9031DCP Dual Zone
For station configuration settings, see the sample screens ( Figure 3b) in
Appendix A for Type 8410D.
Handling Calls
Dual Zone coverage allows you to make and answer calls from either Zone 1
or Zone 2 using the same MDW 9031/9031DCP Dual Zone Pocket Phone for
both radio modules. Once administered properly for your communications
system, you can make and answer calls from either Zone 1 or Zone 2 in the
same way as the single zone MDW 9031/9031DCP Pocket Phone. See
TransTalk
®
9000 Digital Wireless System MDW 9031/9031DCP Wireless
Pocket Phone Installation and Use for information on how to use your
handset.