Landice 72070 - Manual (Page 18)

13
User HRC Programs
The Executive Trainer has storage capacity for 2 User HRC Programs, which you can create and change. The treadmill will
remember these programs even if you unplug it from the wall. The 2 User HRC Programs will be pre-loaded as 20-minute
programs.
A User HRC Program looks and runs exactly the same as a standard HRC Program. The primary difference between HRC
Programs and User HRC Programs is customization. Unlike the HRC Programs, User HRC Programs allow you to manually
edit individual segments.
To Edit a User HRC Program:
MENU->Programs->HRC PROGRAMS
After selecting the User HRC Program you want to edit, you
will enter the Program Preview Screen. Press EDIT to enter
EDIT MODE.
Use the designated “+/-” keys or the numeric keypad to adjust the
Program Time or Maximum Speed.
If you want to adjust the targeted heart rate from segment to segment
throughout the program, press Edit Profile.
When you first enter the HRC Profile Edit Screen, you default to a
detailed view of the 1st segment of the 20 segment program.
To adjust the Target Heart Rate, use the designated “+/-” keys or the
numeric keypad.
To change segments, use the designated “+/-” keys of the numeric
keypad.
Press Return to exit the Profile Edit Screen.
Press Preview to see the program preview of your updated changes or Start to begin your program.
Your newly modified User HRC Program will be permanently stored in the Executive Trainer’s memory even if the treadmill
is unplugged.