Landice 72070 - Manual (Page 20)

Race mode is a unique feature exclusive to the Landice Executive Trainer. Race is a manually controlled distance based
program that monitors your progress versus a virtual pacer. The virtual pacer can be your previous/best-recorded time or
manually dialed in during set up. There are five different preset race distances:
1 /
2
Mile, 1 Mile, 2 Mile, 5 K, and 10 K.
To run a Race:
Press Menu -> Programs -> Specialty Programs-> Race to enter the
Race Setup screen.
Use the designated “+/-” keys to select your desired distance: 1 /
2
Mile,
1 Mile, 2 Mile, 5K, or 10K.
After selecting your distance, use the designated “+/-” keys or the
numeric keypad to dial in your pacer’s speed.
Notice that your personal best and previous times for this distance
are posted at the top the setup screen.
Press START to begin the race.
As soon as you begin, you will default to the Road Screen. During
the Race, the Road Screen will display both you and the pacer (the
pacer is always the opposite gender).
The pacer will finish the race distance exactly at the time you selected
in setup. Since you are in manual speed control throughout the race,
you control your own finish time.
Your runner will always remain centered in the Road Screen. If the
pacer is to the right of you, he/she is winning. If the pacer is to the
left of you, you are winning.
The statistics at the bottom also display the up-to-the-second
distance between both runners.
The Track Screen also displays both of your positions on the track
and updates the distance ahead/behind statistic.
15
Race Mode