Lowrance electronic LMS 335C DF - Manual (Page 166)

158
Another option is course-up mode, which keeps the map at the same
orientation as the initial bearing to the waypoint. When either the
track-up or course-up mode is on, an "N" shows on the map screen to
help you see which direction is north.
To change map orientation: from the Map Page, press MENU |
↓ to
M
AP
O
RIENTATION
| ENT . Use
↑ or ↓ to select the desired mode, then press
ENT .
Press EXIT | EXIT to return to the page display.
Map Menu, left; Map Orientation menu with
the North Up map orientation option selected, right.
NOTE:
In North Up and Course Up, the present position arrow appears in
the center of the map page. In Track Up, the position arrow appears
centered in the lower third of the page.
Navionics

Charts
Your unit can display Navionics

electronic charts on MMCs. They
work just like a MapCreate custom map on an MMC.
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
2. From the Map Page, press MENU |
↓ to
M AP D ATA
| ENT |
↓ to
N AVIONICS
M AP C HOICE
| ENT . Use
↑ or ↓ to select the Map Name, then press
ENT | EXIT | EXIT .