Lowrance electronic LMS 335C DF - Manual (Page 79)

71
To turn the Fish I.D. feature on:
1. From the Sonar Page, press
MENU |
↓ to
S
ONAR
F
EATURES
| ENT .
2. Press
↓ to
F
ISH
S
YMBOLS
| ENT | EXIT | EXIT .
To turn off Fish I.D., repeat these instructions.
FishTrack

The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press MENU |
↓ to
S
ONAR
F
EATURES
| ENT .
2. Press
↓ to
F
ISH
D
EPTHS
| ENT | EXIT | EXIT .
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected (at left, dual-
frequency menu; center, single-frequency menu). When the check box to
the left is checked, the feature is on. At right, Sonar Page showing Fish
I.D. symbols and FishTrack depths turned on.
Frequency (Change Transducer Frequency)
(LMS-335C DF only)
The LMS-335C DF transducer operates with both 200 kHz and 50 kHz.
The 200 kHz frequency has a 12
° cone angle and the 50 kHz frequency
has a 35
° cone angle.
Symbols with
FishTrack depths