Lifescan Ultra 2 - Manual (Page 18)

12 Customer Service 1 800 227-8862
3. Match the code on the meter with the code
on the test strip vial
If the code on the meter does not match the
code on the test strip vial, press
or to
match the code number on the test strip vial.
The new code number will flash on the display
for three seconds, then briefly stop flashing,
after which the display will advance to the
APPLY BLOOD screen.
If the codes already match, press to go to
the APPLY BLOOD screen. When you do not
make a change after five seconds, the display
will advance to the
APPLY BLOOD screen.
The meter is now ready to perform a blood
glucose test.
St
ar
tin
g the t
e
st
pr
oc
e
ss
ƽ
CAUTION: Matching the code on the meter and the code on the
test strip vial is essential to obtaining accurate results. Each time
you test, check to make sure the code numbers match.
DCO_06344501B_OU2_OB_USe.qxd 12/21/05 8:03 AM Page 12