Lifescan Ultra 2 - Manual (Page 36)

30 Customer Service 1 800 227-8862
After getting a result
Once you have read your result, you may:
• Attach notes to this result if the flags/comments feature is on, see
page 32, or
• Review your meter memory by pressing to go to MAIN MENU , see
page 36, or
• Turn the meter off by removing the test strip.
Removing the used lancet
If you would like to cover the exposed lancet tip,
remove the sampler cap by twisting it off. Then,
place the lancet protective disk on a hard
surface. Push the lancet tip into the disk.
To eject the lancet, point the OneTouch ®
UltraSoft ® Blood Sampler down and away from
you. Push the release button to ensure that the
sampler is not cocked. Push forward on the ejection/cocking control
and the lancet will come out. Pull the ejection/cocking control to the
middle position. Replace the cap.
Ap
ply
in
g
b
lood and r
e
adin
g r
e
sults
DCO_06344501B_OU2_OB_USe.qxd 12/21/05 8:03 AM Page 30