Lexmark Z600 - Manual (Page 54)

Resolving unsuccessful or slow printing
54
The Power/Resume button is blinking
Check your computer screen for error messages.
• If the printer is out of paper:
1 Load paper.
2 Press the button.
• If the printer has a paper jam, see “Printer has a paper jam” on page 57.
Resolving unsuccessful or slow printing
The following topics can help you improve unsuccessful or slow printing.
Printer is plugged in, but does not print
For help, first see the troubleshooting checklist on page 49, and then:
Check the printer status:
Windows 98/Me/2000 Windows XP
1 Click Start Settings Printers.
2 From the Printers folder, double-click
the Lexmark Z600 Series printer icon.
3 From the Printer menu, make sure:
• Set as Default is selected.
• Pause Printing is not selected.
1 Click Start Control Panel.
2 Click Printers and Other Hardware.
3 Click View installed printers or fax
printers.
4 From the Printers folder, make sure
there is a check next to the
Lexmark Z600 Series printer icon
(indicating that it is the default printer). If
there is no check, right-click the icon,
and then click Set as Default Printer.
5 From the Printer menu, make sure that
Pause Printing is not selected.