Understanding the printer software, Paper guide and release tab, Front cover – Lexmark Z600 User Manual
Page 6: Paper exit tray, Power/resume button, Paper support, Sheet feeder, Usb cable connector, Power supply connector, Understanding t he printer software
Understanding the printer software
6
The following table describes each part.
Understanding the printer software
Your printer software works with your operating system to print documents with superior results. This
software has two parts: the Printer driver and the Lexmark Solution Center.
Printer driver
You can change your printer settings in the printer driver. To print a typical document on plain paper,
you do not need to change your printer settings. When you install the printer software, the Page
Setup dialog box and the Print dialog box are set to these default settings:
Use this:
When you want to:
Power/Resume button
• Turn the printer on or off.
• Eject paper from the printer. For more information, see “Printer has a
• Check the printer status. For more information, see “Understanding
error messages and flashing lights” on page 53.
Front cover
• Install or change print cartridges.
• Clear paper jams.
Paper exit tray
Stack paper after printing.
Paper guide and
release tab
Make sure paper feeds correctly into the printer.
Paper support
Keep paper straight in the sheet feeder.
Power supply connector
Sheet feeder
Feed paper automatically. For information about the amount of paper
you can load, see “Printing ideas” on page 10.
USB cable connector
Connect the printer to the computer.