Liebert Air Cooled - Manual (Page 14)

Site Preparation
10
Figure 10 Piping connections for 6- and 8-fan Lee-Temp and Quiet-Line Condensers
Access Valve (Hot Gas) on
Condensers (Typ. 2)
Inlet Connection
Upper Headers (Typ.)
Hot Gas Line
Liquid
Line
Fasten liquid and hot gas lines
to leg using flat surface clamps
with isolators (field-supplied).
See
Detail
A-A
DPN000670
Rev. 01
Position elbow
to direct relief
valve downward
Inverted traps (field-supplied)
to extend above base of coil by
a minimum of 7-1/2" (190mm).
Detail A-A
Metal
Clamp
Isolator
Condenser
Connections,
Typical
Note: Two circuits supplied; single circuit shown for clarity.
Entering Hot
Gas Line
Leaving
Liquid Line