Lightwave Communications USB-Wizard - Manual (Page 15)

11
User Login Mode
User login mode requires a user to login with a user name and password from the list created by the administrator. This mode will
also disable use of the front panel until the user logs in.
Function: Keystroke:
Adds a character to the
user name/password
Removes previous character
from the user name/password
Submit user name/password
Exit USER LOGIN and return
to previous mode. This function
is only available if security is
not currently active.
Figure 9- User Login screen
ADDITIONAL MODES AVAILABLE WITH SECURITY
The three modes that follow are only available if the administrator is logged in.
Administration Mode
To enter the Administration Mode menu press <A>
from the Maintenance Mode menu (page 10).
Administration Mode allows the administrator to use
the following functions:
Function: Keystroke:
Change the administrator’s
password
Disable security
Update User Name List
Figure 10- Administration Mode menu
Toggle Language in menus
between English and Italian
Selects the idle time in minutes
Exit Administration Mode and
return to previous mode
Esc
Enter
A-Z
0-9
(Type any alphabetical or numeric character)
Backspace
If the password submitted is incorrect, the user will not be able to proceed.
If the password submitted is correct, the user will proceed to Normal Mode.
Esc
S
C
U
ADDITIONAL MODES AVAILABLE WITH SECURITY
L
T - -
(xxx from 000 to 255. i.e. T002
would set the time-out period
for 2 minutes. 000 will disable it)
- (0-2)
x (0-9)
x (0-9)
x