Lightwave Communications USB-Wizard - Manual (Page 18)

14
OSD Command Mode (Cont'd)
Function:
Keystroke:
Enter Maintenance Mode
Sets scan time-out on
each port
Selects a specific port
Enters Search Mode and adds a character
to search string and selects the CPU’s
name that matches best.
Selects the first port on the switch
Selects the last port on the switch
Display Help Menu
Switch to a selected port
Figure 15- More Command Mode Features
Exit OSD Command Mode
The mouse can also be used to control the
USB Wizard within the Command Mode menu.
•
The mouse cursor can be moved to the Scan, Help, and Exit fields where the user can then click on the left mouse
button to perform that function.
•
Ports listed on the screen can be selected by moving the cursor onto that port and clicking. Clicking twice on a
selected port will switch to that port and exit Command Mode.
•
To change the displayed ports on the screen simply click on the up and down arrows located to the right of the port
names displayed.
F1
End
Enter
Home
Esc
A-Z
0-9
(Type any alphabetical or numeric character)
Note: The user must exit Command Mode to type to a CPU.
To exit Command Mode, either hold down any touch-switch on the front
panel for more than 2 seconds, OR press <ESC> on the keyboard.
Press <CTRL> while in the Command Mode menu
to display the Edit, Maintenance, Port, and Timeout
control features.
P - -
(Pxx would be P01, P02, etc.)
(0-9)
x (0-9)
x
Ctrl
+
T - -
(xxx from 002 to 255. ie. t002
would set the time-out period
for 2 seconds)
- (0-2)
x (0-9)
x (0-9)
x
Ctrl
+
M
Ctrl
+