Lifetime #7525 User Manual
Page 11
HD985
Required For This Page:
MA
(3)
3/4” Wrenches
MH (3)
/2” Socket Wrench
Hammer/Mallet
Electric Drill
32.1 Remove the plastic film from the
Backboard.
FA
FA
32.2 Use an electric drill to
insert the Screws (FA).
FR
FL
FB
FB
32
FA (0)
HH00700
MN
MH
MA
AA
AA
35.1 Place a 1/2” x 1/8” Spacer (MN) between each Short
Extension Arm (AA) and the pole.
35.2 Completely tighten the Nuts
from steps 32 through 34.
MA
AE
Note: The Rear Lifter Arms (AR) must be on the inside of the Extension Arms (AE).
33.2 Only finger tighten the Nut.
33.1 Lift the pole up until the Long Extension Arms (AE) line up with the holes
in the Rear Lifter Arms (AR).
AE
MR
AE
MH
AR
AR
AP
33
35
34.1 There must be a 1/2” x 1/8” Spacer (MN)
between each Long Extension Arm (AE) and the
pole.
MA
MH
MN
AE
AE
AE
34
34.2 Only finger
tighten the Nut.
MR
(4)
()
MN