Lincoln Electric INVERTEC V160-S - Manual (Page 18)

C-1 ACCESSORIES C-1
OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Electrical Holder and Cable Assembly
Work Cable and Clamp
Strap Packet
Instruction Manual
Field Installed
K870 - Foot Amptrol tm for TIG welding. When the
V160-Sʼs Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Foot Amptrol connects directly
to the 6 pin Amphenol.
K963-3 - Hand Amptrol tm for TIG welding. When the
V160-Sʼs Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls
the output remotely. The Hand Amptrol connects
directly to the 6 pin Amphenol.
PTA-17V TIG Torch - 150 Amp air-cooled compact
and durable Tig Torch with integral gas valve for gas
control at the torch. The following 1-piece cable torches
can be used with a K960-1 adapter:
• K1782-6 (12.50 Ft.) 1-Piece Cable
• K1782-8 (25.0 Ft.) 1-Piece Cable
PTA-9FV TIG Torch - Gas Valve flexible head torch:
• K1781-7 (25.0 Ft.) 1-Piece Cable
PTA-17FV TIG Torch - Gas Valve flexible head torch:
• K1782-11 (25.0 Ft.) 1-Piece Cable
K960-1-TIG Torch Adapter - for connection of PTA-
17V torches (1-piece cable) to power sources without
gas passing through the Twist Mate connection.
NOTE: Any remote control with trigger-only circuit,
such as the K814 Arc Start Switch, will not be sensed
by the V160-S remote control connection, and there-
fore will not allow control of the output.
CABLE PLUGS
K852-50 - Cable Plug Kit for #1-#2 cable. Attaches to
welding cable to provide quick disconnect from
machine.
TIG Torch Parts Kits - Parts kits are available for the
PTA-17 TIG torch. This kit includes back cap, collets,
collet bodies, nozzles and tungstens.
Order KP508 for PTA-17 torches
See publication E12.150 for parts kits breakdown.
Cut Length Consumables - TIG welding filler metals
are available for welding stainless steel, mild steel,
aluminum and copper alloys. See publication C9.10.
V160-S