Lincoln Electric Power MIG 350MP - Manual (Page 6)

Power MIG ® 350MP
www.lincolnelectric.com [6]
RECOMMENDED OPTIONS
GENERAL OPTIONS
Dual Cylinder Mounting Kit
Permits side-by-side mounting of
two full size gas cylinders, with
easy loading. Attaches easily to
Power MIG undercarriage.
Order K1702-1
Canvas Cover
Protect your Power MIG
® when not
in use. Made from attractive red
canvas that is flame retardant,
mildew resistant and water repel-
lent. Fits any Power MIG
® machine
with or without a gas cylinder in
the cylinder rack. Will not fit if
spool gun holder is attached to the
machine.
Order K2378-1
STICK OPTIONS
Accessory Kit
Complete kit for stick
welding. Includes 30 ft. (9.1 m)
electrode cable, 25 ft. (7.6 m)
work cable, headshield,
work clamp and electrode
holder.
Order K875 for 150 amps
Order K704 for 400 amps
Remote Output Control
Consists of a control box with
choice of two cable lengths.
Permits remote adjustment of
output.
Order K857 for 25 ft. (7.6 m)
Order K857-1 for 100 ft. (30.5 m)
TIG OPTIONS
PTA-17 150 Amp Air-Cooled
TIG Torch
Order K1782-2
for 12.5 ft. (3.8 m) length, 2-cable
Order K1782-4
for 25 ft. (7.6 m) length, 2-cable
PTA-26 200 Amp Air-Cooled
TIG Torch
Order K1783-2
for 12.5 ft. (3.8 m) length, 2-cable
Order K1783-4
for 25 ft. (7.6 m) length, 2-cable
Parts Kits
Magnum
® Parts Kits provide all
the torch accessories you need to
start welding. Parts kits provide
collets, collet bodies, a back cap,
alumina nozzles and tungstens in
a variety of sizes, all packaged in
an easy to carry reclosable box.
Order KP508 for PTA-17
Order KP509 for PTA-26
Foot Amptrol ®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection).
Order K870
Hand Amptrol ®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection)
Order K963-3
Arc Start Switch
Needed if an Amptrol
® is not used
when TIG welding. Comes with a
25 ft. (7.6 m) cable. Attaches to
the TIG torch for convenient finger
control.
Order K814
Cut Length Consumables
TIG welding filler metals are avail-
able for welding stainless steel,
mild steel, aluminum and copper
alloys.
See publication C9.10
WIRE FEEDER OPTIONS
Aluminum Feeding Kit
Conversion kit for welding with
3/64" (1.2 mm) aluminum wire.
Includes drive rolls, contact tips
(qty. 2), polished wire guides and
cable liner.
Order K2153-1
Fast-Mate ™ Adapter
Allows guns with a Fast-Mate ™
type back end to plug into a
Power MIG
® .
Order K489-8