Lincoln Electric Power MIG 350MP - Manual (Page 7)

Power MIG ® 350MP
www.lincolnelectric.com [7]
RECOMMENDED OPTIONS
Dual Procedure Switch
Easily mounts to gun using
convenient velcro straps to allow
welding operators to select
between two preset welding
procedures or modes. Plugs into
the gun trigger connector on the
wire feeder.
Order K2449-1
Magnum ® 250LX ™ Spool Gun
280 amps, 60% duty cycle. Feeds
.025"-3/64" (0.6-1.2 mm) diameter
aluminum wire on 2 lb. (0.9 kg)
spools. With remote wire feed
speed control. 25 ft. (7.6 m) cable.
Order K2490-1
Magnum ® 250LX ™ Spool Gun
Control Cable Extension
Extend your spool gun reach with
a 25 ft. (7.6 m) Control Cable
Extension. Features a 7-pin
female MS-type connector on the
spool gun end and a 7-pin male
MS-type connector on the power
source end.
Order K2519-1
Spool Gun Holder
Provides neat storage of spool
gun cable, and gas hose on
Power MIG.
Order K1738-1
Python ® -Plus Air-Cooled
Push-Pull Gun
The Python
® -Plus push-pull gun
features the same great perform-
ance and ergonomics as the stan-
dard Python
® gun but features a
Magnum ® style back end for easy
connection to a Lincoln ® Power
MIG ® without an adapter. The
ergonomic handle design, finger-
tip controls and foolproof set-up
make the Python
® the most
advanced gooseneck gun on the
market. The Python
® -Plus gun
with standard air-cooled barrel is
rated 200A @100% duty cycle,
250A @50% duty cycle.
Order K2447-1
for Air-Cooled 15 ft. (4.5 m)
Order K2447-2
for Air-Cooled 25 ft. (7.6 m)
Order K2447-3
for Air-Cooled 50 ft. (15.2 m)
Prince ® XL Push-Pull Gun
The Prince ® XL is the smallest,
lightest pistol grip push-pull gun
you can buy. Choose the standard
straight barrel or optional curved
barrel with ratings up to 225 amps
100% duty cycle. The patented
EZ-Lock system make rotating or
changing the barrel an easy no-
tool twist of the wrist.
Order K2296-2
for Air-Cooled 25 ft. (7.6 m)
Push-Pull Gun Connection Kit
Required for aluminum welding
with the Prince
® XL, Python ® * and
CobraMax ™ air or water-cooled
push-pull guns. Includes power
block, gun bushing, gas hose
adapter, gun gas bypass valve
(required for Prince
® XL Gun only),
and wire reel brake limiter.
Requires aluminum drive roll kit.
*Not required for Python
® -Plus
Guns.
Order K2154-1
Spindle Adapter for
Small Spools
Permits 8" (200 mm) O.D. spools
to be mounted on 2" (51 mm)
O.D. spindles.
Order K468
Welding Fume Extractors
Lincoln offers a wide variety
of welding fume extraction
environmental system solutions,
ranging from portable systems
easily wheeled around the shop
to shop-wide central systems
servicing many dedicated welding
stations.
Request Publication E13.40