Lowrance electronic IFINDER PRO - Manual (Page 116)

108
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press
→ to move the cursor to the next letter and repeat until
the name is correct, then press ENT | ENT . B. Jump down to the lower se-
lection list by pressing ENT , then press
↓ or ↑ to select a waypoint from
the list, then press ENT . The Waypoint Information screen appears.
Find By Name menu.
A. To navigate to the waypoint, press press ENT. (The Go To
Waypoint command is already highlighted.) The unit will show
navigation information to the waypoint.
B. To find the waypoint, press
→ to
F
IND ON
M
AP
| ENT . The Map Page
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the previous page, press EXIT repeat-
edly.