Lowrance electronic IFINDER PRO - Manual (Page 40)

32
7. To clear the search and return to the last page displayed, press
EXIT | EXIT | EXIT . (Before you completely exited out of the Search menus,
you could have gone looking for another place.)
NOTE:
Search works from mapping and POI data loaded in iFINDER. If
you do not have a high-detailed custom map (containing POI data)
for the area you are searching loaded on the MMC, you may not
find anything.
Set Home Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. Easy Mode allows you to save two
waypoints (Home and Man Overboard). To save a Home Waypoint: 1.
Press and release
ENT . 2. The S
AVE
A
S
H
OME
W
AYPOINT
? menu appears,
with Y ES
highlighted. To accept yes, press ENT . The waypoint appears
on the map as an X, named "Home."
Save Home Waypoint menu, left. At right, Home waypoint, with X sym-
bol and name. When selected by the cursor, the pop-up box appears.
The example shows waypoint set at the cursor location. If cursor was
not active, the point would be placed at the current position.
Caution:
Saving a new "Home" waypoint will overwrite and erase the
previous "Home" waypoint.
Navigate Back Home
This command will automatically take you back to the "Home" way-
point you created.
1. Press FIND | ENT ; then follow navigation arrows on the Map Page or
the compass rose on the Navigation Page.
To cancel navigation, press MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT . iFINDER stops showing navigation information.
Pop-up box