Lexicon RV-5 - Manual (Page 81)

RV-5 Troubleshooting & Maintenance
6-7
RV-5 ERROR MESSAGES
RV-5 error messages are displayed on the OSD when certain error
conditions exist. This section explains the meaning of these error
messages and how to fix each problem.
VIDEO ERROR MESSAGES
The following error messages apply specifically to video issues.
VIDEO PROCESS ERROR
This error message will display
when the incoming datastream is
at a higher resolution than the
resolution of the VIDEO OUT
p a r a m e t e r. T h e R V- 5 c a n
up-sample a lower resolution to a
higher resolution. However it can
n o t d o w n - s a m p l e t o a l o w e r
resolution setting.
To correct the problem, right click to return to the VIDEO OUT
Setup parameter and change the VIDEO OUT parameter to AUTO
or to a resolution setting that is higher than that of the incoming
datastream.
VIDEO FORMAT OUTPUT
ERROR
This error message will display
when the RV-5 is connected to an
H D M I v i d e o m o n i t o r b u t t h e
VIDEO OUT parameter is set to a
resolution that is not supported by
the HDMI video monitor.
To correct the problem, right click
to return to the VIDEO OUT Setup
parameter and change the VIDEO
OUT parameter to AUTO or to a
resolution setting that is supported
by the video monitor.
HDCP VIDEO ERROR
This error message will display
when the video monitor is not
H D C P c o m p l i a n t a n d t h e
incoming datastream requires
HDCP compliance. Typically, any
HDMI source will require a HDCP
compliant video monitor.
To correct the problem, change
the incoming datastream to a
non-HDCP source or change the
video monitor to one that is HDCP
compliant.
VIDEO PROCESS NOTICE
Video input resolution
can not be higher than
video output resolution
when set to FAROUDJA.
Please adjust settings.
PRESS > TO CONTINUE
VIDEO OUTPUT NOTICE
Video output resolution
not supported by HDMI
monitor. Please select
a different VIDEO OUT
resolution.
PRESS > TO CONTINUE
Display is not
HDCP Capable
HDCP NOTICE