Land Pride AFM4214 - Manual (Page 13)

11
Introduction
5/29/13 AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
Land Pride
Table of Contents
Introduction
Definitions
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your All Flex Grooming Mowers have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 45. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
26563
Manual Storage Tube
Land Pride welcomes you to the growing family of new
product owners.
This All Flex Grooming Mowers has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating
practices will help you get years of satisfactory use from
this machine.
Application
The AFM4214 (14 foot) and AFM4216 (16 foot) All-Flex
Mowers are designed and built by Land Pride to provide
excellent cutting quality and performance on lush type
turf grasses that are located on expansive and well
manicured areas such as sports fields, theme parks,
fairways, turf farms, and large estates.
They will deliver excellent performance when attached to
40-70 hp tractors with 540 rpm PTO speed and pull-type
draw bar. The hydraulic wing cylinders will easily lift up
the wing decks for a 6'-8" overall transport width when
moving from one site to another on public streets or on
right-of-ways.
The contour following capability, highly productive cutting
widths and rear discharge design of the floating cutting
decks will greatly reduce wide-area cutting times and still
deliver finely groomed surfaces at mowing speeds from
2-6 mph. The AFM4214 and AFM4216
All-Flex Mower can be ordered with slip-clutch or
conventional wing driveline configurations and a choice
of 15 inch or 18 inch deck tires.
See “Specifications & Capacities” on page 36 and
“Features & Benefits” on page 40 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
•
Refer to Figure 1. Store your Operator’s Manual in the
dry storage tube for future reference.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.