Land Pride AFM4214 - Manual (Page 33)

31
Section 5: Maintenance & Lubrication
5/29/13 AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
Land Pride
Table of Contents
Lubrication Points
50 Multi-purpose
spray lube Multi-purpose
grease lube Multi-purpose
oil lube Intervals in hours
at which lubrication
is required
Lubrication
Legend
Driveline Constant Velocity Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
IMPORTANT: Extensive lubrication must be
performed every 8 hours of operation to extend the
life of the constant velocity joint.
•
Grease constant velocity joint in a straight position
to force grease through its passages and into the
cavity. Grease should be visible around ball joints.
•
Grease fittings in the outer telescoping member,
u-joints, and driveline shields every 8 hours of
operation to prevent premature break down.
8
Hours
Driveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
25
Hours
12726
13667
12729
Inner Tube
Inner Tube of Driveline
Type of Lubrication: Wheel Bearing Grease
Clean and coat all inner tubes of the Drivelines with a light
film of grease and then reassemble.
50
Hours