Land Pride ZR52 - Manual (Page 24)

22
Section 4: Maintenance and Lubrication
ZR44 & ZR52 (S/N 472619 & below) Accu-Z Razor ® Zero Turn Mowers 356-059M 4/19/10
Table of Contents
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours of operation. Change
more often under dusty or dirty conditions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual.
4. Refer to Engine Owner’s Manual.
5. Inspect every 6 months or 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 200 hours
or 2 years whichever comes first.
6. Check fuel line hoses, fuel valve and grommet for any cracks or leaks.
7. Initially change oil and filter in the Hydro-Gear units (IZT) after the first 50 hours of operation. Thereafter, change
IZT hydraulic oil and filter ever 200 hours of operation.
Maintenance Schedule
Service at Intervals Indicated Weekly or
50 Hours
Monthly or
100 Hours
Every
200 Hours
Annually or
500 Hours
Verify Safety Start Interlock System Daily
Visually Inspect Unit Daily
Visually Inspect Tires Daily
Check Oil Level, Engine (1) Daily or every 4 hours
Clean Air Intake Screen Daily or every 4 hours
Check Fuel Level Daily
Blades - Sharpen & Securely Fastened Daily
Discharge Chute - Securely In Place & In
Lowest Position Daily
Grease Deck Height Pivots X
Grease Gauge Wheel Bearings X
Change Engine Oil & Filter (1) (4) X
Clean Cylinder And Head Fins X
Check Battery Connections X
Check Tire Pressure With A Gauge X
Clean Engine Exterior (4) X
Replace Air Cleaner Paper Element X
Clean And Re-gap Spark Plugs (4) X
Check Pump And Deck Belt Tension (5) X
Check Fuel and Hydraulic Lines (6) X
Tighten Lug Nuts On Wheels (2) X
Change Fuel Filter X
Replace Spark Plugs X
Change IZT hydraulic oil & Filter (7) X