Land Pride ZR52 - Manual (Page 34)

32
Section 5: Specifications & Capacities
ZR44 & ZR52 (S/N 472619 & below) Accu-Z Razor ® Zero Turn Mowers 356-059M 4/19/10
Table of Contents
Ground Speed Forward: 0-7 MPH
Reverse: 0-5 MPH
Steering Type Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns.
Steering Turning Radius True zero degree. Turns within its own length with counter-rotating
independent drive wheels
Brake Service Hydrostatic dynamic braking
Parking Automotive-style drum brakes.
Integral park brakes are automatically engaged when steering levers are
placed in neutral.
Mower Drive Single V-belt with electric clutch and spring tension idler pulley
Safety Features Operator presence system connected to deck and drive clutches.
Stabilizer rollers rear of tractor.
Seat Molded-vinyl seat. Bolt loosening required for forward and reverse
adjustments.
Optional armrests kit for standard molded-vinyl seat.
Optional deluxe cushion seat with arm rests.
Mainframe Construction 1 1/2" square solid steel.
Drive Motor Mount 1/8” welded steel
Front Caster Wheels Mounted with roller bearings on each wheel.
Front Caster Forks 3/8” steel.
Deck Thickness 11 Gauge decks with reinforcements welded into spindle mount areas
Box-Section Reinforced Front Edge 14 GA. x 1 1/4” Bar
Deck Trim Edges Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth 4 1/8” deep, (room for high-capacity mowing)
Deck Lift Foot-operated deck height adjustment.
Pin for setting height and transport position.
Hand Operated Controls Choke, throttle, ignition switch, electric mower clutch and Integrated parking
brakes.
Indicators Engine warning light.
Optional hour meter through parts only
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp.
Cutting Heights Foot-operated deck height adjustment. Pin for setting height, transport
position. Height adjustment in 1/4" increments from 1 1/2” to 4 1/2”
Mowing Blades Heavy-duty, heat-treated, high-lift steel blades
.20" x 2 1/2" x 15.7" .20 x 2 1/2” x 18.3”
Blade Tip Speed 14,666 FPM 16,727 FPM
Blade Drive V-belt drive to all three spindles. Spring tension idler pulleys.
Spindles Machine ductile housing, 1" diameter high carbon steel shafts and sealed ball
bearings.
Flotation Free-floating mower using three blades with center blade to the front.
Mower is suspended at the four corners on spring-assisted chains.
Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.
ZR44 & ZR52 Accu-Z Razor Residential Riding Mower (General Specifications)
ZR44 ZR52