Logitech Wireless BH870 - Manual (Page 10)

BH870 Wireless Bluetooth® Headset User’s Guide 10
Tip: If you use the ear hook, slide the attachment up or down until the headset fits comfortably to your ear.
Remember that two different ear hooks are included. One is very flexible and can be moulded to any angle for an
optimal fit.
4.3 Pairing the Headset with Your Mobile Phone
To use Bluetooth , you must set up the wireless communication between the BH870 Headset and your mobile phone by pairing them.
Pair the headset manually at any time using the procedure below.
1. If your headset is currently turned on, turn it off by pressing and holding its multifunction button for about 4 seconds — until its LED
gives four quick flashes and then turns off.
2. Put your (powered-off) headset in pairing mode by pressing and holding its multifunction button for about 4 seconds — until its LED
lights a constant blue.
4 sec.
3. Make sure Bluetooth is active on your mobile phone and put your phone into Bluetooth pairing mode. The procedure for doing this
varies by mobile phone manufacturer and model. See your mobile phone documentation for details.