Lenovo TS200V - Manual (Page 58)

6. Insert the two tabs 2 of the new front fan assembly into the corresponding
holes in the chassis, and press the other two tabs 1 through the holes until
the front fan assembly is secured in place.
7. Connect the new front fan assembly cable to the power fan connector on the
system board. See “System-board internal connectors” on page 14.
8. Reinstall the secondary hard disk drive if removed. See “Installing or replacing
the secondary hard disk drive” on page 28.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to “Completing the parts replacement” on
page 44.
Figure 30. Installing the front fan assembly
42 Installation and User Guide