Lenoxx Electronics CD-160 - Manual (Page 16)

AUT AUT AUT AUT AUTOMA OMA OMA OMA OMATIC LEVEL TIC LEVEL TIC LEVEL TIC LEVEL TIC LEVEL CONTROL CONTROL CONTROL CONTROL CONTROL (ALC) (ALC) (ALC) (ALC) (ALC)
This set has the latest Automatic Level Control circuitry, therefore, it is not necessary
to adjust the Volume Control when recording. This circuit automatically records at the
correct level and prevents over loading.
N O T E N O T E N O T E N O T E N O T E : While recording, you may adjust the Volume Control or Bass Boost Switch
as you desire without affecting the recording operation.
TTTTTO RECORD FROM THE BUIL O RECORD FROM THE BUIL O RECORD FROM THE BUIL O RECORD FROM THE BUIL O RECORD FROM THE BUILTTTTT-IN AM/FM RADIO -IN AM/FM RADIO -IN AM/FM RADIO -IN AM/FM RADIO -IN AM/FM RADIO
1. Load the blank cassette tape into Deck B (recording deck) with full reel on the left
side.
2. Locate the portion of the tape where you desire to start recording by using the
Rewind (or Fast Forward) feature or start at the beginning of the tape.
3. Follow the instructions TTTTTO PLA O PLA O PLA O PLA O PLAY YY Y Y THE RADIO THE RADIO THE RADIO THE RADIO THE RADIO (see page 8).
4. Make sure the Power Switch is ON. Press the Radio Switch and the Radio Indicator
Lamp will light.
5. Tune into the station you want to record, press the Cassette Record Button
and Cassette Play Button simultaneously. Both buttons should remain in their
down positions when released. If the Record Button cannot go down, see page 17.
Do not force this button down. Or if button does not stay down, your tape may have
reached the end of the tape, reverse it so that full reel is on the left side.
6. You are now recording from the built-in radio and the recording process will
automatically stop at the end of the tape.
7. To stop the recording manually, press the Cassette Stop/Eject Button.
8. To shut off the set, press the Power Switch. The Power/Batt. Indicator will go off.
TTTTTO COPY O COPY O COPY O COPY O COPY CASSETTE T CASSETTE T CASSETTE T CASSETTE T CASSETTE TAPES (T APES (T APES (T APES (T APES (TAPE DUBBING) APE DUBBING) APE DUBBING) APE DUBBING) APE DUBBING)
To record from a pre-recorded cassette to a blank cassette tape, follow the steps
below:
1. Press the Power Switch, the Power/Batt. Indicator will light.
2. Press the Tape Switch, and the Tape Indicator Lamp will light.
3. Place the pre-recorded cassette in Deck A (Playback Deck) with full reel on the left
side. Push the Cassette Pause Button first, then the Cassette Play Button. The tape
will not play because the Cassette Pause Button is pressed.
4. Place the blank cassette in Deck B with full reel on the left side. Push the Pause
Button first, then the Record and Play Buttons together so that they both lock down.
5. Release BOTH BOTH BOTH BOTH BOTH Pause Buttons on Deck A and Deck B. Both cassettes will start and
the music on the pre-recorded cassette in Deck A will be recorded directly onto
the blank cassette in Deck B. If the Record Button cannot go down, see page 17.
Do not force this button down. Or if button does not stay down, your tape may
have reached the end of the tape, reverse it so that full reel is on the left side.
6. When the recording is completed on one side, if you want to record on the
other side, turn both cassettes over to the other side and repeat above steps 2 to 4.
7. If the tapes have reached the end, the automatic stop feature will activate and
stop the recording. Remove both tapes from the tape compartments.
8. To hear what you recorded, follow TTTTTO PLA O PLA O PLA O PLA O PLAY YY Y Y A A A A A CASSETTE T CASSETTE T CASSETTE T CASSETTE T CASSETTE TAPE APE APE APE APE instructions on
page 13. Remember to rewind the tape to the beginning then press Play.
HIGH SPEED DUBBING HIGH SPEED DUBBING HIGH SPEED DUBBING HIGH SPEED DUBBING HIGH SPEED DUBBING
CD-160S050699 V.2 E
15
To make recordings faster, slide the Dubbing Speed Switch to HIGH speed position
before starting recording. Remember to return the switch to NORMAL position for
playback.
N O T E : N O T E : N O T E : N O T E : N O T E : When you want to play the cassette tape after recording, press the TAPE
Switch and the Cassette Rewind Button, and then press the Cassette Play
Button. Adjust the Volume Control and the Bass Boost Switch to your taste.