Panasonic DMC-LC70PP - Manual (Page 22)

Preparation
22
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after
finishing the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
ª Date Printing
• You can set the date printing in DPOF
print setting on this camera. (P83)
• Using the supplied software, [SD
Viewer for DSC], it is possible to have
the date imprinted on the picture. For
details, please read the supplied
operating instructions for PC
connection.
• When you go to a photo studio for
printing, be sure to order the printing
of the date. For further information,
ask the photo studio. Depending on
the studio, it may not be possible to
print the date.
¬Suggestions/Tips ¬
• You can set the year from 2000 to
2099. The 24-hour system is used.
• After the fully charged batteries or new
batteries have been inserted for more
than 3 hours, the clock setting is
stored (in the camera) for 3 months
after the batteries are removed. (The
time may be shorter if the batteries are
not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case,
set the clock again.
CLOCK SET
10:00 1 MAR. 1 1.2004
M/D/Y
EXIT SET SELECT MENU
WB
DMC-LC80.book 22 ページ ２００４年６月１５日 火曜日 午後５時４９分